Fuse Inspection - Yamaha Scorpio Service Manual

FUSE INSPECTION

FUSE INSPECTION
1.Remove:
Side cover (right)
G
Refer to the "SIDE COVER" section.
2.Remove:
Fuse 1
G
3.Inspect:
Fuse
G
Defective → Replace.
Blown fuse (new) → Inspect circuit.
NOTE:
Install new fuse of proper amperage.
Amperage: 10 A
4.Replace:
Blown fuse
G
*****************************************************
Blown fuse replacement steps:
G
Turn off ignition and the circuit.
G
Install a new fuse of proper amperage.
G
Turn on switches to verify operation of elec-
trical device.
G
If fuse blows immediately again check circuit
in question.
*****************************************************
WARNING
Do not use fuse of higher amperage rating
than recommended. Extensive electrical
system damage and fire could result from
substitution of a fuse of improper amper-
age.
5.Install:
Fuse
G
3 - 31
INSP
ADJ