Tire Inspection; Steering Head Inspection - Yamaha Scorpio Service Manual

TIRE INSPECTION/

STEERING HEAD INSPECTION

TIRE INSPECTION
1.Measure:
Tire inflation pressure
G
Out of specification → Adjust.
Basic weight (with
oil and full fuel
tank)
Maximum load*
Cold tire pressure
Up to 100 kg load*
100 kg ~ maximum.
Load*
* Load is the total weight of the cargo, rider, pas-
senger and accessories.
2.Inspect:
Tire surfaces
G
Wear/Damage → Replace.
1 Tread depth
2 Side wall
3 Wear indicator
3.After a tire repair or replacement, be sure to
tighten the valve stem locknut 1 to specifi-
cation.
STEERING HEAD INSPECTION
1.Stand the motorcycle on a level surface.
NOTE:
Stand the motorcycle on its centerstand.
2.Elevate the front wheel by placing a suitable
stand under the engine.
3 - 23
INSP
ADJ
Front
200 kPa
(2.0 kg/cm
200 kPa
(2.0 kg/cm
Minimum tire tread depth (front
and rear):
0.8 mm
131 kg
180 kg
Rear
200 kPa
2 ) (2.0 kg/cm 2 )
225 kPa
2 2
) (2.25 kg/cm )