8
8.2
To install the Network Scanner Driver
To install the scanner driver, perform the following procedure.
1
Turn on the computer and start Windows.
–
Exit from all active Windows applications, if required.
2
Set the CD-ROM (bizhub PRO 1050 Series CD-ROM) on the CD-ROM
drive.
3
As the CD-ROM is booted automatically, select the [Scanner Install].
4
Select [TWAIN Driver].
–
Conduct the installation following the wizard.
An install wizard of KONICA MINOLTA Scanner Driver starts.
8-4
About the Network Scanner Driver
bizhub PRO 1050/1050e Scanner