Clearing Media Misfeeds; Clearing Media Misfeeds - Konica Minolta magicolor 2400W User Manual

Clearing Media Misfeeds

To avoid damage, always remove misfed media gently, without tearing it. Any
pieces of media left in the printer, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the print face when removing the misfed media.
Make sure not to spill any toner inside the printer.
CAUTION
Unfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the control panel
window persists, open and close the printer's covers. This should clear the
misfeed message.

Clearing Media Misfeeds

65