Setting Up The Printing System - Konica Minolta Magicolor 2430DL Reference Manual

Setting Up the Printing System

This section describes the installation procedure under Red Hat Linux
8.0. This procedure is not required for installation under Red
Hat Linux 9.0.
1
From the Main Menu, click Extras, point to System Settings, and then
click Printer System Switcher.
If Red Hat Switch Printer is not installed on your computer, please
install it.
2
Select CUPS, and then click
OK.
3
Click OK.
4
From the Main Menu, select System Tools, then Terminal.
5
Enter the following command "/etc/init.d/cups restart".
(It requires root privilege.)
System Requirements for the Printer Driver
49