When Using a Network Connection
The network connection settings can be specified in one of three ways:
Rendezvous setting, IP printing setting and Specifying Port 9100. We recom-
mend using the Rendezvous setting.
Rendezvous (OpenTalk) Setting
1
Connect the printer to an Ethernet network.
2
Open Print Center, which can be accessed by clicking Macintosh HD,
then Applications, then Utilities.
3
Click Add in the Printer List.
4
Select Rendezvous from the pop-up menu.
Print Center/Printer Setup Utility Settings
Rendezvous (OpenTalk) should be enabled by default. However, if
you are unable to connect to the printer, enable Rendezvous
(OpenTalk) from the Rendezvous Configuration window in Page-
Scope Web Connection (refer to chapter 5, "Using PageScope
Web Connection" ).
15