Samsung SVMi-4 Technical Manual And User Manual page 134

Samsung
SVMi-4 & SVM-400 Manual
KMMC DIGIT TIME
LCR ADVANCE TIME
LCR INTER DIGIT
MCL DELAY
MS LED ON
OFF HOOK RING
OFF HOOK SELECT
OHVA ANSWER TM
OVERLAP INT DGT
MMC: 501
Controls the grace period between programming actions while in
a programming session. The timer automatically returns the sys-
tem to secure programming status.
Controls the length of time before selecting the next a llowable
route when a station is allowed to route advance.
Controls the grace period between dialling valid digits before drop-
ping the call and returning the user back to error tone.
Controls the time when the system should start transmitting Au-
thorisation Code after sending MCL access code (Cable & Wire-
less 131 access).
Controls the time a manual signalling key remains on after use.
Controls the time between ring bursts to a user who has a
camped-on call.
Controls the grace period before placing an internal/external call
as programmed in MMC 306.
Controls the duration of an OHVA call before automatic rejection.
This timer controls the grace period between receiving address
information in overlap receiving mode via BRI/PRI line. After expi-
ration of this timer the system operator will be alerted.
Programming
MMCs