•
Brake pad wear
•
Brake system
•
Cruise control
•
Engine
•
Hill start assist
•
Ignition
•
Low fuel level
•
Message indicator
•
Shift
•
Stability control (ESP) and traction
control
•
Start-Stop
•
Water-in-fuel
If a warning or indicator lamp does not
illuminate when the ignition is switched
on, this indicates a malfunction. Have the
system checked by properly trained
technician.
ABS warning lamp
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
to have normal braking (without ABS).
Have the system checked by a properly
trained technician as soon as possible.
Airbag warning lamp
If it illuminates when you are
driving, this indicates a
malfunction. Have the system
checked by a properly trained technician.
Brake pad wear warning lamp
It will illuminate when the brake
pads have worn down to a
predetermined limit. Have this
checked by a properly trained technician
as soon as possible.
Transit (TT9) Vehicles Built From: 26-09-2011, Vehicles Built Up To: 31-12-2013
Instrument Cluster
Brake system lamp
If it illuminates when you are driving, check
that the parking brake is not engaged. If
the parking brake is not engaged, this
indicates a malfunction. Have the system
checked by a properly trained technician
immediately.
Cruise control indicator
Cruise Control (page 104).
Direction indicator
indicator bulb. See Changing a Bulb
(page 38).
Door open warning lamp
tailgate properly.
53
It illuminates when the parking
brake is engaged.
WARNING
Reduce your speed gradually and
stop your vehicle as soon as it is safe
to do so. Use your brakes with care.
It will illuminate when you have
set a speed using the cruise
control system. See Using
Flashes during operation. A
sudden increase in the rate of
flashing warns of a failed
It will illuminate when you switch
the ignition on if you have not
closed the doors, the bonnet or