Washer Fluid Check; Technical Specifications - Ford Transit Owner's Manual

WARNINGS
The plug will rise when opening the
drain. Make sure you close the drain
after the water has been drained.
Note: With the engine running, the
water-in-fuel indicator lamp will go out after
approximately 2 seconds.
Note: Only add fuel that meets the Ford
specification. See Fuel and Refuelling
(page 86).

TECHNICAL SPECIFICATIONS

Vehicle fluids
Do not use fluids which do not meet the specifications or requirements defined. Use
of unsuitable fluids may lead to damage which is not covered by your Warranty.
Transit (TT9) Vehicles Built From: 26-09-2011, Vehicles Built Up To: 31-12-2013
Maintenance
1. Attach a suitable hose to the drain plug
and direct the hose into a suitable
container.
2. Unscrew the drain plug one to two
turns and allow the water to drain.
Install in the reverse order.

WASHER FLUID CHECK

Note: The front and rear washer systems
are supplied from the same reservoir.
When topping up, use a mixture of washer
fluid and water to help prevent freezing in
cold weather and improve the cleaning
capability. We recommend that you use
only high quality washer fluid.
For information on fluid dilution, refer to
the product instructions.
CAUTION
135