Vehicle Jack - Ford Transit Owner's Manual

1. Remove the wing nut(s).
2. Pass the bracket and cable through the
wheel opening.

Vehicle jack

WARNINGS
The vehicle jack supplied with your
vehicle should only be used when
changing a wheel in emergency
situations.
Before using the vehicle jack, check
that it is not damaged or deformed
and that the thread is lubricated and
free from foreign matter.
Never place anything between the
jack and the ground, or the jack and
the vehicle.
Note: Vehicles with a tyre repair kit are not
equipped with a vehicle jack or a wheel
brace.
The jack, wheel brace and jack handle are
located in a storage compartment in the
front right stepwell.
Transit (TT9) Vehicles Built From: 26-09-2011, Vehicles Built Up To: 31-12-2013
Wheels and Tyres
430 and 460 series vehicles
•
•
All except 430 and 460 series vehicles
•
151
Assemble the jack handle.
Slide the flat end of the jack handle
over the locking valve. Turn the handle
fully clockwise. Insert the handle into
the pump, and lift the vehicle using a
pumping motion.
Unfold the jack handle.