Cruise Control; Dsg Transmission - Volkswagen 2014 Jetta Hybrid Quick Start Manual

Hide thumbs Also See for 2014 Jetta Hybrid:
Table of Contents

Advertisement

Cruise Control

Activate
1. Locate the cruise control
stalk on the lower left
hand side of the steering
column.
2. Turn the switch on top of
the cruise stalk to the ON
position.
3. The speedometer icon will
appear in the available
multifunction display.
Your most recently set speed will appear as a small icon in the multifunction display. It will
remain in memory until you turn the vehicle off, or until you turn the switch on the top of the
cruise stalk to the OFF position.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under CRUISE CONTROL.
DSG
Transmission
®
The DSG
technology is a groundbreaking "two-in-one" concept. Totally
®
unlike a conventional automatic transmission, it combines the fuel efficiency
of a clutch-operated transmission with the convenience of automatic shifting.
Twin electronically controlled shafts manage gear selection, always anticipating
your next shift.
LEARN MORE AT
knowingyourvw.com
Text
CRUISE10
to
38981
to
*
watch the Cruise Control video.
Standard text and data rates apply.
Rocker switch
mph
Set cruising speed
60
When you get to your cruising speed, press the rocker
switch at the end of the cruise stalk towards SET/ –.
The green CRUISE light will appear in the instrument cluster.
To increase your speed by 1 mph, press the rocker switch up, towards RES/ +.
To reduce speed by 1 mph, press the rocker switch down, towards SET/–.
Cancel and resume
• To cancel the cruise speed, press the brake pedal or turn the switch on the
top of the stalk to CANCEL.
• The CRUISE light will go off.
• To resume your speed, press the rocker switch up, towards RES/+.
Cruise Control /
DSG
®
Transmission
23
*Do not text while driving.
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents