Appendix; Useful Information; Reset Default; Canceling Shutter-Release Lock - Minolta DYNAX 3L Instruction Manual

2165_E.qxd 03.2.10 2:06 PM

USEFUL INFORMATION

APPENDIX

Reset Default

When the camera is turned off the following functions are reset:
Function
Subject program
Flash
Focus mode
Self-timer
Continuous advance
Wireless/remote flash
Remote-control
Canceling the Shutter-release Lock
To prevent the film from being fogged, the shutter cannot be released
if a lens is not attached to the camera. This can be changed when
mounting the camera on a non-dedicated lens mount such a T-mount
on a telescope or microscope. Only disable the shutter-release lock
when necessary.
1. Turn the camera off.
2. Press and hold subject-program
button and drive-mode button.
3. With both buttons held down,
turn the camera on.
• Repeat the procedure to activate the shutter-release lock.
Shutter locked.
54
Page 54
Default Setting
Canceled, Program AE active.
Autoflash
Autofocus
Canceled
Canceled
Canceled
Canceled
Shutter can be released.
Page
37
32
47
41
43
52
44