Minolta DYNAX 3L Instruction Manual page 59

2165_E.qxd 03.2.10 2:06 PM
Problem Cause
Flash did not
fire in a low-
Picture is light situation
and the shut-
blurred.
ter speed was
.
slow
Flash pic- Subject is
ture is too beyond flash
dark. range.
When using
Lens hood
the built-in
was attached
flash, the
or subject
bottom of
distance was
the picture
less than 1m.
is dark.
The date and
The date or time are not
time cannot set or the
be imprint- date imprint-
ed. ing function
is off.
"Er"
appears on Camera mal-
the data function
panel.
Page 59
Solution
Use fill flash, a tripod, or faster
film.
Make sure the subject is within
the flash range.
Remove the lens hood.
To prevent lens shadowing, the
subject must be at least 1m (3.3ft.)
from the camera.
The clock and calendar needs to
be set if the date and time display
blinks. Turn on the date imprinting
function.
Turn the camera off and on. If normal
camera operation does not resume or
the camera malfunctions repeatedly,
contact an authorized Minolta Service
Facility.
Page
–
32
32/
33
17/
18
59