Focus Lock In Remote Control Mode - Minolta DYNAX 3L Instruction Manual

2165_E.qxd 03.2.10 2:06 PM

FOCUS LOCK IN REMOTE CONTROL MODE

When your subject is not centered in the focus frame, use manual
focus or focus lock. Focus lock cannot be used with moving subjects
or the sports subject program.
1. Set the camera to the remote-control
mode.
2. Center your subject in the
focus frame, then press the
shutter-release button partway
down until viewfinder focus
signal appears.
• Focus and exposure is set for the picture.
• Press the shutter-release button partway
down again to reset the focus.
• Focus can also be locked with the spot AF
button (p. 46).
3. Lift your finger from the shutter-
release button.
• The focus signal will remain lit indicating
focus lock.
4. Recompose the picture.
5. Point the remote toward the front of
the camera and press the release or
delay button.
• The focus lock will remain in effect after the picture is taken allowing
multiple remote-control pictures to be made . To cancel the focus lock,
select the remote-control mode again with the drive mode button.
Page 45
45