Continuous Advance - Minolta DYNAX 3L Instruction Manual

2165_E.qxd 03.2.10 2:06 PM

CONTINUOUS ADVANCE

In this mode, the camera continues to release the shutter and
advance the film as long as the shutter-release button is held down.
1. Press the drive-mode button until
continuous advance indicator appears
on the data panel.
2. Press and hold the shutter-release
button to begin taking a series of
pictures.
• The camera takes a maximum of 1.7 frames per second when the shutter-
speed is 1/250 second or above, flash set to flash cancel, and new
batteries. The frame rate is slower when using the built-in flash as the flash
must charge between exposures. With accessory flashes, the shutter will
continue to release even if the flash is charging.
• With moving subjects or the sports subject program, the shutter will release
only when the camera has focused on the subject between exposures.
• To return to single frame mode, press the drive-mode button until single
frame advance indicator appears on the data panel.
• AF zoom xi and power zoom lenses cannot be zoomed when taking
pictures with continuous advance.
Page 43
43