Selecting The Imprinting Format - Minolta DYNAX 3L Instruction Manual

2165_E.qxd 03.2.10 2:06 PM
DATE AND TIME SETTING
GETTING STARTED
8. Press the select button to select the hour.
• The display will be changed from date to time.
• The hour register will blink. The initial setting is 0.
• Confirm the date when adjusting the clock to a
different time zone or near midnight.
9. Press the adjust button to change the hour
value.
• The data back has a 24-hour clock 3pm is 15.
.
10. Press the select button to select the
minute.
• The minute register will blink. The initial setting is 00.
11. Press the adjust button to change the
minute value.
12. Press the select button to set the clock and
calendar.
• The data panel will stop blinking and return to the
initial display.
• Pressing the shutter-release button partway down or pressing the date button
will also set the clock and calendar.
• To synchronize the camera to another clock, set the minute register to the
upcoming time and press the adjust button when the other clock reaches that
time.

Selecting the Imprinting Format

Press the date button to choose the date imprinting format.
• The display changes as follows:
No imprinting
18
Page 18
- FOR OWNERS OF THE QUARTZ-DATE MODEL
Year/ Month/ Day Day/ Hour/ Minute