Connect the power cable to the left power connector on the backplane.
2.
NOTE:
8-SFF Universal Media Bay cabling
Route the cables along the edge of the system board, and then connect the cables to the system board:
•
8 SFF DVD-RW/VGA/USB connections
Connect the VGA/USB cable to the Front VGA/USB connector toward the rear of the system board.
o
Connect the SATA optical cable to the SATA optical/storage drive connector.
o
•
8 SFF VGA/USB connections
Cabling from the 2 SFF backplane will vary if a PCIe storage controller is installed.
Cabling 86