Locking Files; Image Pasting - Konica Minolta DiMAGE X60 Instruction Manual

LOCKING FILES

Single, multiple, or all files can be locked. To lock images in the internal memory, remove the memo-
ry card from the camera. A locked file cannot be erased by a delete function. However, the format-
ting function (p. 74) will erase all files whether locked or not. The lock function is in section 1 of the
playback menu (p. 56). Lock has four options:
This frame The file displayed or highlighted in playback mode is locked or unlocked.
All frames All files in the memory location are locked.
To lock or unlock multiple files. When this setting is chosen, the frame-selection
screen is displayed (p. 57). Use the left/right keys of the controller to highlight the
file to be locked. Pressing the up key marks the file with the lock indicator. To
Marked
unlock a file, highlight it with the yellow border and press the down key; the lock
frames
indicator disappears. Continue until all the files to be locked are marked. Press the
central button of the controller to lock the files, or press the menu button to cancel
the operation.
Unlock all To unlock all files in the memory location.

IMAGE PASTING

Image pasting makes a still image composite by pasting a small
image into a background image. The composite image has the
same image size and quality as the background image. The lens
cover must be open to use this function. The composite image can
only be saved in the memory location where the background
image is stored.
Display the background image on the LCD monitor. To display an
image in the internal memory, remove the memory card from the
camera.
Select image pasting in the playback menu and press the center
button to start the pasting process.
60 Playback - advanced operation
Delete
AudioCaption
Lock
Image pasting Enter
Copy
Nine frame choices are shown on the LCD monitor.
Select the frame with the controller. Press the center
button to continue.
Pressing the menu button at any time during the opera-
tion cancels the routine. The camera memorizes any
settings entered.
The frame is displayed on the background image.
Change the frame size using the up and down keys;
three sizes are available. Press the center button to
continue.
Choose the location for the pasted image by moving
the frame with the controller keys. Press the center but-
ton to continue.
A live image is displayed in the frame. Compose the
subject inside the frame and press the shutter-release
button partway down to lock the focus. The current
recording settings are used to capture the image and
the optical zoom can be used. Press the shutter-release
button all the way down to take the picture and com-
plete the operation.
:sel. :enter
:size :enter
:move :enter
Press shutter to paste.
61