Table of Contents
Advertisement
Memory cards
SD Memory Cards and MultiMediaCards are manufactured with precision electronic components.
The following may cause data loss or damage:
• Improper use of the card.
• Bending, dropping, or subjecting the card to impact.
• Heat, moisture, and direct sunlight.
• Static electrical discharge or electromagnetic fields near the card.
• Removing the card or interrupting the power supply while the camera or a computer is accessing
the card (reading, writing, formatting, etc.).
• Touching the electrical contacts of the card with your fingers or metal objects.
• Using the card beyond its life. Purchasing a new card periodically may be necessary.
The response time during recording and playback is longer with MultiMediaCards compared with
SD Memory Cards. This is not a defect, but rather due to the specifications of the cards. When
using large capacity cards, some operations like deletion may take longer.
The SD Memory Card has a write-protect switch to prevent image data
from being deleted. By sliding the switch to the bottom of the card, the
data is protected. However, when the card is protected, images cannot
be recorded. If an attempt is made to record or delete an image with
the camera, the card-locked message appears on the LCD monitor.
Memory cards should not be used to permanently store image data.
Always make a copy of camera files on an appropriate storage device
or recording media. Konica Minolta has no responsibility for any loss
or damage to data.
108
Appendix
Before important events and journeys
• Check the camera's operation; take test pictures and purchase spare batteries.
• Konica Minolta has no responsibility for any damage or loss incurred by equipment malfunction.
Operating temperatures and conditions
• This camera has been designed for use in temperatures from 0°C to 40°C (32°F to 104°F).
• Never leave the camera exposed to extreme high temperatures, such as in a car parked in the
sun, or to extreme humidity.
• When taking the camera from a cold to a warm environment, place it in a sealed plastic bag to
prevent condensation from forming. Allow the camera to come to room temperature before
removing it from the bag.
LCD monitor care
• The LCD monitor is manufactured using high-precision technology and more than 99.99% of the
pixels operate properly. Less than 0.01% of the monitor pixels are displayed as color or bright
points; this is not a monitor defect and does not affect the recorded image.
• Do not apply pressure to the surface of the LCD monitor; it may be permanently damaged.
• In cold temperatures, the LCD monitor may become temporarily dark. When the camera warms
Write-
up, the display will function normally.
protect
switch
• If fingerprints are on the LCD monitor surface, gently wipe with a soft, clean, dry cloth.
Copyright
• TV program, films, video tapes, photographs, and other materials may be copyrighted.
Unauthorized recording or duplication of such material may be contrary to copyright laws. Taking
pictures or images of performances, exhibitions, etc., is prohibited without approval and can
infringe on copyright. Images protected by copyright can only be used under the provisions within
Lock
the copyright laws.
position
Questions and service
• If you have questions about your camera, contact your local camera dealer or write to the Konica
Minolta distributor in your area.
• Before shipping your camera for repair, please contact a Konica Minolta service facility.
109
Hide quick links:
Advertisement
Table of Contents
