Disconnecting The Camera From The Computer; Windows 98 / 98 Second Edition; Windows Xp, 2000 Professional, And Me; Macintosh - Konica Minolta DiMAGE X60 Instruction Manual

DISCONNECTING THE CAMERA FROM A COMPUTER
Never disconnect the camera when the indicator lamp is lit - the data or memory card may
permanently be damaged.

Windows 98 / 98 Second Edition

Confirm that the indicator lamp is not lit. Turn the camera off, and then disconnect the USB cable.

Windows XP, 2000 Professional, and Me

To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window opens indicating the device to be stopped.
Click on the small window to stop the device; the safe-to-remove-hardware message appears.
Disconnect the USB cable.
When more than one external device is connected to the
computer, repeat the procedure above except right click
on the unplug-or-eject-hardware icon to open the unplug-
or-eject-hardware window.
88 Data-transfer mode
The hardware devices connected to the system are displayed.
Click the display-device-components check box. Highlight the
device to be stopped by clicking on it then click "Stop."
A confirmation screen appears to indicate the devices to be
stopped. Clicking "OK" stops the device.
The safe-to-remove-hardware message appears.
Disconnect the USB cable.

Macintosh

Confirm that the indicator lamp is not lit and then drag the mass-
storage device icon and drop it into the trash. Turn the camera off,
and then disconnect the USB cable.
89