Printing Dpof Files - Konica Minolta DiMAGE Z1 Instruction Manual

PRINTING DPOF FILES

The USB DIRECT PRINT menu DPOF-print option allows still images and an index print
selected with the DPOF printing options in section 2 of playback menu to be printed from
an Epson USB DIRECT-PRINT compatible printer. See page 78 on how to create a
DPOF file.
Before each print run, check the printer settings; refer to the printer manual. A fully
charged battery should be used when the camera is connected to the printer. The use of
the AC adapter (sold separately) is recommended over the use of the battery.
Print file?
Number of prints: 7
No
Yes
Printing finished.
OK
Connect the camera to the printer using the camera's USB cable.
The larger plug on the cable is connected to the printer. Open the
card chamber door and insert the smaller plug of the cable into
the camera.
Turn the camera on; the USB Direct Print screen is displayed
automatically. Open the USB DIRECT-PRINT menu. Highlight
"Start" in the DPOF-print option in section 2 of the menu. Press
the central button of the controller to begin the routine.
The number of prints in the print run are displayed; index prints
are counted as one. Use the left/right keys to highlight "Yes," and
press the center of the controller to start printing.
Once printing begins, the operation can be canceled by pressing
the center of the controller. The printing finished message will
indicate the end of the operation; turn the camera off to end the
routine.
105