Step 2: Charging The Battery Pack - Sony Handycam DCR-DVD92E Operating Manual

Step 2: Charging the battery pack

You can charge the battery after attaching
the "InfoLITHIUM" battery pack (P series)
(p.107) to your camcorder.
DC IN jack cover
DC IN jack
CHG lamp
Power switch
Battery
DC plug
Mains lead
To the wall socket
1
Slide the battery pack in the
direction of the arrow until it
clicks.
2
Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
3
AC Adaptor
4
5
Connect the AC Adaptor to the
DC IN jack on your camcorder.
Open the DC IN jack cover to connect
the AC Adaptor.
DC IN jack cover
Match the  mark
on the DC plug with
 mark on your
camcorder.
Connect the AC Adaptor to the
wall socket using the mains lead.
The CHG (charge) lamp lights up and
charging starts.
The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor
from the DC IN jack on your
camcorder.
Disconnect the AC Adaptor holding
both your camcorder and the DC plug.
17