Step 6: Setting The Date And Time - Sony Handycam DCR-DVD92E Operating Manual

Step 6: Setting the date and time

Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or slide the POWER switch
down.
If you do not use your camcorder for about
•
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p.111).
Skip to step 4 when you set the clock for
the first time.
1
 [SETUP].
Touch
2
Select TIME/LANGU. with
/ , then touch
3
Select [CLOCK SET] with
then touch .
POWER switch
.
/ ,
4
Select the desired geographical
area with
/
5
Set [SUMMERTIME] to [ON] with
/ , if necessary, then touch
.
6
Set [Y] (year) with
touch .
You can set any year up to the year
2079.
7
Set [M] (month), [D] (day), hour
and minute, then touch
The clock starts.
Refer to page 106 for information concerning
•
"World time difference."
, then touch .
, then
/
.
23