Image Control - Sharpness, Contrast, & Filter - Minolta DiMAGE S414 Instruction Manual

IMAGE CONTROL - SHARPNESS, CONTRAST, & FILTER
Changes in color, sharpness, and contrast can be made using the custom 2 section of the multi-
function recording mode menu (p. 54). The sharpness, contrast and filter imaging controls give
photographers the ability to maximize the image information at the scene.
Any changes made with these functions are applied to the live image on the monitor. Changes made
to sharpness and contrast may be difficult to see on the monitor. However, when viewed on a
computer, the changes will be evident. The levels must be set before the image is recorded. If any
setting other than normal or off is selected, an indicator will be displayed showing an increase (+) or
decrease (–) in the quality selected. Turning the camera off will not reset these functions.
Sharpness
Contrast
Filter
Contrast: low
Sharpness: soft
To accent or soften details in an image in three levels: hard (+),
normal, and soft (–).
To increase or decrease the contrast of the scene in three levels:
high (+), normal, and low (–).
To adjust the overall color of a Natural Color or Vivid Color image:
warm (+) and cool (–).
Normal
Sharpness: hard
Contrast: high
65