Battery Condition Indicator; Auto Power Save - Minolta DiMAGE S414 Instruction Manual

Minolta dimage s414 instruction manual
Hide thumbs Also See for DiMAGE S414:
Table of Contents

Advertisement

BATTERY CONDITION INDICATOR

This camera is equipped with an automatic battery-condition indicator. When the camera is on, the
battery-condition indicator appears on the data panel and monitor. The monitor icon will change from
white to red when battery power is low. If the data panel and monitor are blank, the batteries may be
dead or installed incorrectly.
When installing batteries, make sure the battery terminals are clean. Residue or dirt on the terminals
can sometimes cause a false low-battery warning. Always use a clean, dry cloth to clean batteries.

AUTO POWER SAVE

To conserve battery power, the camera will turn off displays and unnecessary functions if an
operation is not made within a certain period. The LCD monitor will turn off after thirty seconds. The
data panel turns off after one minute. To restore the displays, press any button or key, or turn the
mode dial to another position. The length of the auto-power-save period for the data panel can be
changed in the basic section of the setup menu (p. 84).
Full-battery Icon - the batteries are fully charged. This icon is displayed
for five seconds on the monitor when the camera is turned on. The icon
remains on the data panel.
Low-battery warning - battery power is very low. The batteries should
be replaced as soon as possible. This warning automatically appears
and remains on the monitor until the batteries are changed.
Blinking low-battery icon - when displayed on the data panel with no
other icons, power is insufficient for camera operation. The shutter will
not release. When replacing exhausted batteries, wait thirty seconds
between removing the old batteries and inserting the new ones.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents