INSTANT PLAYBACK
After an image is captured, it can be displayed on the monitor before being saved. An index display is
used with the continuous-advance or bracketing drive modes (p. 32). When used with voice memo,
the audio recording begins after the image is played back.
Instant playback is activated with a menu; see navigating the auto-recording mode menu section on
page 42. Instant playback is also set in the custom 2 section of the multi-function recording menu (p.
54). There are three menu settings:
Off
Instant playback is disabled.
2 sec
The captured image will be displayed for two or ten seconds. While dis-
played, the image can be deleted before being saved.
10 sec
To store an image during playback.
If the center of the controller is pressed during
the instant playback, the displayed image will
immediately be saved and the playback
canceled.
Auto
: delete
: store
To delete an image.
To delete an image during the instant
playback, press the QV/delete button
(1). A confirmation screen will appear.
Use the left/right keys of the controller
to highlight "YES." "NO" will cancel the
operation.
Press the controller to delete the
image.
1
Delete this frame?
Yes
No
49