Table of Contents
Advertisement
Various settings
3
Touch [4 Line/Page].
4
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the default number of lines (between 5 and 128).
–
If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
5
Touch [OK].
The number of lines per page is set.
CR/LF Mapping
You can specify the data substitution method when printing text data. (De-
fault setting: OFF)
[Mode 1]: Substitutes CR for CR-LF.
[Mode 2]: Substitutes LF for CR-LF.
[Mode 3]: Substitutes to CR-LF.
[OFF]: Does not perform substitution.
C451
9
9-26
Advertisement
Table of Contents
