To Set The "Default Copy Output Levels" Function - Konica Minolta Di2010 User Manual

5

To set the "Default Copy Output Levels" function

This specifies the auto and manual default printing density level settings.
1
Press the [Utility] key.
2
Touch [User's Choice].
3
Touch [4/6], and then touch
[Default Copy Output Levels].
4
Select the desired settings, and
then touch [Enter].
❍
The default Auto density level
can be set to [Lighter],
[Normal] or [Darker].
❍
The default Manual density
level can be adjusted by one
level at a time.
5
Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
5-22
5.3 Changing Default Settings
Di2010/Di2510/Di3010/Di3510