Special Copying
Frame and Fold Erasure (continued)
Setting Frame Erasure
Set Frame Erasure when using Frame Erasure to eliminate the black
copy marks along borders. Refer to page 7-4 for instructions on using
Frame and/or Fold Erasure.
FRAME MEASUREMENT: 05mm/10mm/15mm
NOTE: The frame setting will remain valid until it is changed.
1 Press
ERASURE
Frame Erasure. The current
Frame measurement will be
displayed in the message area.
2 Press
. The Frame light will
[P]
flash.
3 Use keypad to enter a Frame
measurement (05mm, 10mm,
15mm).
Press: [0][5] for 5mm
[1][0] for 10mm
[1][5] for 15mm
The Frame measurement is
displayed in the message area.
4 Press [P] twice to store the
Frame measurement. The
Frame erasure light will go out,
and the initial print quantity will
be displayed.
Frame Erasure eliminates black
copy marks along borders.
to select
Special Copying 7-5