Copying From The Document Feeder (Radf/Adf) - Konica Minolta Copier 2223 User Manual

Basic Copying

Copying from the Document Feeder (RADF/ADF)

Use the Document Feeder (RADF/ADF) to copy up to 50 unstapled,
smooth, flat originals. Originals will be directed to the platen glass,
automatically. Originals will be fed from the top sheet.
ORIGINAL PLACEMENT: Face down, same as copy paper feeding direction
RADF/ADF MAXIMUM CAPACITY: 50 sheets (20 lb bond)
RADF/ADF CURLING TOLERANCE: 10mm maximum
INCOMPATIBLE: Book Copy
NOTES:
1 If paper guides are not aligned to the originals, originals will not feed correctly.
2 When APS is on, 5.5"x8.5" originals will be detected as 8.5"x11". Non-standard
originals will be detected as the next larger standard size.
5-4 Basic Copying
1 Arrange originals in order and
face down as shown. Press
to clear previous
AUTO
settings. The ADF indicator will
light.
2 Place original(s) FACE DOWN
on the RADF/ADF, with page 1
on bottom. If necessary, use
the RADF/ADF tray extension
to support large originals.
3 Adjust paper guides to the
paper width.
4 Select optional copying
features (density, lens mode,
etc.).
5 Use numeric keypad to enter
print quantity.
6 Press
START PRINT
.