Automatic Exposure Selection (Aes); Automatic Magnification Selection (Ams); Automatic Humidity Sensor; Automatic Edge Delete - Konica Minolta Copier 2223 User Manual

Copier Information
Automatic Settings (continued)

Automatic Exposure Selection (AES)

When the AES light is on, exposure is selected automatically to
produce the appropriate copy density. Manual density adjustments
override AES.

Automatic Magnification Selection (AMS)

AMS operates automatically when copy size is selected manually, i.e.,
when copy size is smaller or larger than the original. The copier
automatically reduces or enlarges the copy image to accommodate the
selected paper size.

Automatic Humidity Sensor

The Automatic humidity sensor is used to control paper feeding
performance depending on the humidity level. This automatic sensor is
used to enhance copy quality and copy reliability and to prevent paper
from being mishandled.

Automatic Edge Delete

Automatic Edge Delete automatically erases all four borders of the
page by a maximum of 5mm to enhance copy quality and copy
reliability when using the document feeder. This feature can be
activated or de-activated by your Konica service representative.
Odd-Even Original Counter in 1 s 2 Mode
The odd-even original counter automatically counts the originals and
copies the last page independently (as 1-sided) if the original contains
an odd number of pages. This feature can be activated or de-activated
by your Konica service representative.
Copier Information 3-13