Table of Contents
Advertisement
2. Tap the UP button until "DISP" is displayed.
3. Press ENTER, the display will show "VALU".
4. Tap the UP button until "LOCK" is displayed and tap the ENTER button.
5. Press the UP button to select "ON" to activate this function, or "OFF" to
deactivate this function.
6. Press ENTER to confirm.
7. Press MEDE/ESC to return to the main menu."
7.3.4 Temperature C/F – This function changes the temperature the unit will display
from either Celsius or Fahrenheit. Fahrenheit is set as default.
7.3.5 Initial effect – This function allows a user to create and assign a custom "Home
Position" into the fixture. Adjusting the Pan and Tilt values then locking those values into
the fixture's internal memory creates the new "Home" position.
7.3.6 Reset Default – This function is used to restore the fixture's original factory
settings. All settings will be set back to the default values (shaded). Any edited scenes
will be lost.
7.4 Reset Functions: The reset function returns a motor to the "Home" position. There are
several reset functions available on this fixture. The list below details the functionality of
each available selection.
7.4.1
Reset All: This function will reset all internal motors to the home position.
7.4.2
Reset Pan and Tilt: This function will only reset the pan and tilt motors to the
home position.
7.4.3
Reset Colors: This function will only reset the color wheel to the home position.
7.4.4
Reset Gobos: This function will only reset the gobo wheels to the home position.
7.4.5
Reset Others: This function will reset all other motors not associated with any in
the previously listed reset commands to the home position.
7.5 Effect Adjust:
7.5.1 Test Channel – This menu function allows the user to select each individual
©Elation Professional®
24
Design Spot LED™
Design Spot LED™
Advertisement
Table of Contents
