Elation Design Spot LED Manual page 21

Last Run Hours
This function tracks a cycle run time. Use this function to keep track of rental period,
or to note the time from the last service. This setting can be reset at any time, see
"L-Timer Password."
Timer Password
Use this function to enter the "Clear Last Run" password. Password is "038"
Clear Last Run
This function will allow the "Last Run Hours" function be cleared and reset.
7.2.2. Temperature Info.
This function will detail different temperatures associated with the fixture in either
Celsius or Fahrenheit.
Head Temp – This function will display the internal head temperature of the fixture
in real time.
7.2.3. Software version
This function will display the current operating software version of the fixture.
• Select "Software Version" in the system menu.
• Press enter to confirm.
• The LCD will read "V-X.X", "X.X" represents the version number, e.g. "V-1.0",
"V-2.6".
• Use the UP and DOWN buttons to toggle through the software version of
different IC's.
• Press the Mode/Esc-button to return to the main menu.
7.3 Personality:
7.3.1 Status setting
Address via DMX - This function allows the DMX address to remotely be adjusted
from a DMX console. This setting requires special settings for both the controller and
©Elation Professional® 21
Design Spot LED™
Design Spot LED™