System-Setup; Setting The Time; Setting The Date - Silvercrest KH 2156 Operation Manual

System-Setup

Setting the time

The LCD display q shows you the time of day. You set this as
follows:
1. Hold down the S button r for a little longer than 3
seconds. The notice "CODE SETUP" appears. If appox.
15 seconds passes without an entry the device exits the
menu and returns to the standard display.
2. With the  or  button t select "SYSTEM SETUP" and
confirm with the OK button k.
3. In the LCD display q "TIME SETUP" appears. Confirm
with the OK button k. The LCD display q now shows
"TIME" and the time format (24 HR) blinks.
4. With the  or  button t you can switch to the other
time format (12 HR AM/PM). Thereby "AM" stands for "ante
meridium" (= morning, 0:00 to 12:00 o'clock) and "PM"
stands for "post meridium" (= afternoon, 12:00 to 0:00
o'clock). Press the OK button k to confirm.
5. Now the hour indicator blinks. With the  or  button t
select the hour number for the present time of day and
press the OK button k.
6. Now the minute indicator blinks. With the  or  button
t select the minute number for the present time of day
and press the OK button k to save. The "TIME SETUP"
notice appears again.
7. To exit this or the following menus press repeatedly the
EXIT button y until the standard display appears in the
LCD display q.

Setting the date

The LCD display q shows you the date when you press the S
button r. You set the date in this way:
1. Hold down the S button r for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
2. With the  or  button t select "SYSTEM SETUP" and
confirm with the OK button k.
3. In the LCD display q "TIME SETUP" appears. Press the 
button t to change to "DATE SETUP". Confirm with the
OK button k.
4. In the display the year "2009" blinks. With the  or
 button t you can change the year and confirm with
the OK button k. With the  or  button t you can
change the now blinking month and confirm with the OK
button k. Now the day indicator blinks which you can
also change with the  or  button t.
5. To save press the OK button k. The "DATE SETUP"
notice appears again.
- 13 -