Table of Contents
Advertisement
>
It is possible that you are using the wrong code. Start the
brand code search, the automatic code search or the di-
rect code input (manual).
The URC does not change the station on the device.
>
Press the corresponding device button
to the correct mode.
>
In the event that the original RC does not have a "-/- -"
button, change the programme with the CH+/— buttons u
or the number buttons o.
>
If this also does not work the child protection for the
target device could be activated.
Some buttons on the URC do not function properly.
>
It is possible that your URC does not have all of the func-
tions that are on the device's original remote control.
>
It is possible that you have not programmed in the optimal
code. Search for a code that supports more of the target
device's functions.
The URC stops reacting after a button is pressed.
>
The batteries must have enough voltage and be properly
installed.
>
Point the URC towards your device.
The LCD display q shows nothing.
>
The batteries must have enough voltage and be properly
installed.
The contrast could be set too low. Increase the contrast
>
setting.
Disposal
Do not dispose of the device in your normal
domestic waste. This product is subject to the
European directive 2002/96/EC.
Universal remote control
•
Have the universal remote control or parts of it disposed
of by a professional disposal company or by your commu-
nal disposal facility.
•
Observe the currently applicable regulations. In case of
doubt contact your disposal facility.
Batteries/rechargeable batteries
•
Used batteries/rechargeable batteries may not be dis-
posed of in household waste.
•
Batteries can contain poisons which are damaging to the
environment. Therefore, dispose of the batteries/recharge-
able batteries in accordance with statutory regulations.
- 22 -
e to set the URC
Hide quick links:
Advertisement
Table of Contents
