System-Setup; Setting The Time; Setting The Date - Silvercrest KH 2157 Operating Manual

Universal remote control
Table of Contents

Advertisement

Available languages

Available languages

System-Setup

Setting the time

The LCD display q shows you the time of day. You set this as
follows:
1. Hold down the S button r for a little longer than 3
seconds. The notice "CODE SETUP" appears. If appox.
15 seconds passes without an entry the device exits the
menu and returns to the standard display.
2. With the  or  button t select "SYSTEM SETUP" and
confirm with the OK button k.
3. In the LCD display q "TIME SETUP" appears. Confirm
with the OK button k. The LCD display q now shows
"TIME" and the time format (24 HR) blinks.
4. With the  or  button t you can switch to the other
time format (12 HR). After which the time display for the
time of day will show an "A" or "P" before the time. „A"
stands fpr "AM" = "ante meridium" (Morning, 0:00
o'clock midnight to 12:00 o'clock midday). „P" stands for
"PM" = "post meridium" (Afternoon and evening, 12:00
o'clock midday to 0:00 o'clock midnight). Press the OK
button k to confirm.
5. Now the hour indicator blinks. With the  or  button t
select the hour number for the present time of day and
press the OK button k.
6. Now the minute indicator blinks. With the  or  button
t select the minute number for the present time of day
and press the OK button k to save. The "TIME SETUP"
notice appears again.
7. To exit this or the following menus press repeatedly the
EXIT button y until the standard display appears in the
LCD display q.

Setting the date

The LCD display q shows you the date when you press the S
button r. You set the date in this way:
1. Hold down the S button r for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
2. With the  or  button t select "SYSTEM SETUP" and
confirm with the OK button k.
3. In the LCD display q "TIME SETUP" appears. Press the 
button t to change to "DATE SETUP". Confirm with the
OK button k.
4. In the display the year "2009" blinks. With the  or
 button t you can change the year and confirm with
the OK button k. With the  or  button t you can
change the now blinking month and confirm with the OK
button k. Now the day indicator blinks which you can
also change with the  or  button t.
5. To save press the OK button k. The "DATE SETUP"
notice appears again.
- 14 -

Advertisement

Table of Contents
loading

Table of Contents