Maintenance; Suggested Maintenance Procedures - Invacare Veranda 3000 series User Manual

Invacare ® Veranda™ 3000/4000

6 Maintenance

6.1 Maintenance
WARNING!
– After ANY adjustments, repair or service and before
use, make sure all attaching hardware is tightened
securely - otherwise injury or damage may occur.
– Replace any labels that are missing, worn, or torn.
Refer to 3.1 Label Locations, page 17 for a listing of
the labels and their locations.
CAUTION!
– DO NOT overtighten hardware attaching to the
frame. This could cause damage to the frame tubing.

6.1.1 Suggested Maintenance Procedures

1. Before using your wheelchair, make sure all nuts and bolts are
tight.
2. Check all parts for damage or wear and replace.
38
3. Check all parts for proper adjustment.
WARNING!
– DO NOT use your wheelchair unless it has the
proper tire pressure (p.s.i.).
– DO NOT overinflate the tires. Failure to follow
these suggestions may cause the tire to explode
and cause bodily harm. The recommended tire
pressure is on the sidewall of the tire.
CAUTION!
– As with any vehicle, the wheels and tires
should be checked periodically for cracks and
wear, and should be replaced if damaged.
Replace as recommended, refer to 6.1.2
Replacing/Repairing Caster Tire/Tube, page 39and
6.1.3 Replacing/Repairing Rear Wheel Tire/Tube,
page 39.
4. The rear wheels, casters and tires should be checked periodically
for cacks and wear, and should be replaced by a qualified
technician if damaged.
1567855-C