Service; Adjusting Footplate Height; Installing/Removing The Heel Loop - Invacare Veranda 3000 series User Manual

Invacare ® Veranda™ 3000/4000

5 Service

5.1 Adjusting Footplate Height

This procedure applies to the swingaway front riggings and
swingaway elevating legrest.
Remove the threaded handle A and hex screw B securing the
1.
foot plate tube C to the front rigging D.
Adjust the footrest B to the desired height.
2.
3. Using the threaded handle and the hex screw, secure the foot
plate tube to the front rigging. Securely tighten threaded handle.
4. If necessary, repeat STEPS 1–3 to adjust remaining footrest.
D
B
A
28
C

5.2 Installing/Removing the Heel Loop

This procedure applies to the swingaway front riggings and
swingaway elevating legrest.
Reverse this procedure to remove the heel loop.
Wrap heel loop strap A around lower footrest B.
1.
2. Attach hook portion of the heel loop strap to the loop portion
of the heel loop strap.
Using the mounting screw C mounting pin D and nut E, secure
3.
the heel loop strap to the rear edge of the footplate F
4. Repeat STEPS 1–3 to install the remaining heel loop.
B
A
F
1567855-C