Philips 220VW8FB/00 Service Manual page 64

220VW8 LCD 64
(2) Luminance setting
(3) Warm up:
(4) Ambient light:
(5) Ambient temperature: 20 ± 5 °C
7.3 Test equipment
Personal computer with Windows 98/2000/XP
Luminance meter Minolta CA110
Videogenerator: Chroma 2000, 2135, 2250 or equivalent
Colour analyzer: Minolta or Chroma
10 times magnifier
Ruler / Template
Thickness gauge
Watt / Power Meter
7.4 Video Generator test sequence
Will be defined by TVI or its subcontracted quality providers.
7.5 Analog input
Analog input R,G,B level:
Polarity:
Impedance:
Sync:
7.6 Optical response time
Video Bandwidth:
Typical rise time(CMO)
7.7 Protection circuit
The monitor will not be damaged by:
missing vertical or horizontal sync pulse
improper vertical or horizontal sync pulse (picture must be black at improper signals,
unsynchronized pictures are not allowed
7.8 DDC
The monitor can support DDC 2 B and DDC-CI according to the latest VESA standard.
7.8.1 DDC Details
1 User visible strings on .inf file
2 Manufacturer ID ( EDID data)
3 Product ID, "xxxx" 4 codes
4 maximum resolution
5 Horizontal Frequency Range
6 Vertical Frequency Range
7 Monitor Name (13 characteries max.)
7.9 Timings
: controls to be set to 300 nits with
full screen 100 % duty cycle white signal
more than 30 minutes after power on with signal supplied.
400 – 600 lux.
0 - 850 mV max.
positive, negative
75 Ω ± 1%
HV separate sync, composite sync,
165 MHz (dot rate)
5 ms
)
Philips 220VW (22'' LCD MONITOR 220VW8)
PHL
MSB(byte 12): 08
LSB (byte 11): 51
1680x1050
30~93 KHz
56~76Hz
Philips 220VW