Philips 220VW8FB/00 Service Manual page 19

Re-programming of writing HDCP KEY
Step 1: Please install the software of isp HDCP key Version1.13
,the tool is the same with isping EDID.
Step 2: Opening the software.
Step 3: Pressing the button of "OPEN FILE", as follows:
Step 4: Choosing the HDCP KEY that you save:
Step 5: If the Flash Rom of monitor is 2MB, please
choose"3F000",but if it is 1MB please choose 1F000(if you
choose amiss ,the monitor maybe shut down) ,then press
the button of "ISP HDCP".
Electronic Instruction
Step 6: The software will write HDCP KEY into monitor.
Step 7: If the software write HDCP KEY into monitor
successfully ,the message will be display ,as follow , if the
software write HDCP KEY into monitor unsuccessfully
,please check the cable ,and restart from step5 .
220VW8 LCD 19