Sensor Error - SATO s84ex Operator's Manual

7 Appendix
7.8.3

Sensor Error

Detection of a sensor error is performed by the gap sensor or the I-mark sensor when the pitch sensor is
enabled, and the detection distance of the sensor error varies depending on the condition such as the
type of sensor.
Detection method for each sensor type
Gap Sensor
When using the Gap sensor:
Slice level
I-mark Sensor
When using the I-mark sensor:
Slice level
Distance to detect the sensor error
Detection distance of sensor error is determined by the head density and the vertical print area. In
addition, it varies by the setting of the maximum media length.
1) Detection distance of sensor error by the vertical print area
Head density
8 dots/mm (203 dpi)
12 dots/mm (305 dpi)
24 dots/mm (609 dpi)
278
S84-ex/S86-ex Operator Manual
Setting value of sensor error detection
distance
Setting value of sensor error
detection distance
Vertical print area after editing
1250 mm ≥ V > 510 mm
V > 1250 mm
2510 mm
1510 mm
1250 mm
Detection of sensor error
Detection of sensor error
1250 mm
1250 mm
1250 mm
510 mm ≥ V
510 mm
510 mm
510 mm