Working In The Heating System - Buderus 500 Series User Manual

3

Working in the heating system

3 Working in the heating system
DANGER!
A
Only a CORGI registered Engineer is to be entrusted
with the installation of this boiler, the gas supply and the
flue connection. Commissioning, Servicing and any
Repairs must be carried out by a competent person i.e.:
a CORGI Registered Engineer.
All CORGI Registered Installers carry a CORGI
identification card and have a registration number.
Both should be recorded in your boiler logbook.
You can check if your installer/Engineer is registered by
telephoning 01256 372300 or by writing to:
CORGI, 1 Elmwood, Chineham Business Park,
Crockford Lane, Basingstoke. RG24 8WG.
NOTE
I
The heating boiler is designed exclusively for heating
water as part of a central heating system and/or
hot-water system.
It is recommended to enter into a service contract with a
specialist company.
8
http://www.buderus-domestic.co.uk