Event Server Setup - COMPRO TN900R User Manual

TN900R/TN900RW - User' s Manual

Event Server Setup

Here it provides the configurations of various event servers available on the camera. Please click on the event
server you want to configure and provide necessary information.
Email server
Email server supports standard SMTP on SSL-protected webmail platforms such as Hotmail (Windows
Live) and Google Mail (Gmail). To use this function, go to [Event Server Setup] > [Email Event Server Set-
up], and enter the SMTP server address and port respectively. Then enter your user name and password,
and the E-mail subject as you like. As of August 2010, SMTP and SSL settings for Hotmail and Gmail are as
follows:
For [Authentication Method], select [Login]. Enter a complete email address into sender/receiver field:
xxxx@xxxx.com. Other SSL webmail platforms have not been tested.
FTP server
Here it provides the settings of the FTP server that can be used to store event snapshots taken by the
camera when an event is triggered. To start saving snapshots to a FTP server, click on the text link to set
up the FTP server. Ensure that you have put in correct server information before saving the changes. You
may try using the default FTP port number, 21, if you don't know the server's port number. After that, set
up the image server and then go ahead to create an event trigger and choose "FTP" as one of the event
actions. (Depending on your network environment, it may take a certain amount of time to upload snap-
shots to the FTP server.)
Image server
This page allows you define the naming rules of the snapshots taken by the camera and saved to the serv-
er when an event is triggered.
HTTP server
Here it provides the HTTP server settings.
6-10 Event Setup
Platform SMTP Server
Hotmail
smtp.live.com
Google Mail smtp.gmail.com
Table 6-2. Webmail setting
Figure 6-14. FTP server setup example
HTTP server
Figure 6-15. Image server setup example
Port (for SSL)
587
465