Introduction; Your Safety; Proper Use; Features - Parkside PSBM 1100 Operation And Safety Notes

Introduction

The following icons / symbols are used in this instruction manual:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock! Dangerous
electric current – danger to life!
Proper procedure and handling.
n
Design no-load speed
0
V ~
Voltage
W
Watt (performance)
2-speed hammer action drill
PSBM 1100
Introduction

Your safety

Please make sure you familiarise your-
self fully with the way the tool works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. Further details can be found in
the operating instructions. In addition to the above,
you must also observe the general safety advice
contained in the accompanying booklet. Keep
these instructions in a safe place. If you pass the
tool on to anyone else, please ensure that you also
pass on all the documentation.
6 GB/IE
Do not expose the appliance to rain or moisture.
The permeation of liquids into electrical appliances
increases the risk of receiving an electric shock.
Wear ear protectors.
Wear a dust mask.
Wear protective gloves.
Wear protective glasses.
Protection category II power tool; double insulated
Keep children and uninvolved other third parties
at a distance when using electrical power tools.
Damaged appliances, power cables and power
plugs mean potentially fatal risks from electric
shock. Regularly check the condition of the appli-
ance, the power cable and the power plug.
Dispose of packaging materials and the appliance
in an environmentally responsible manner!

Proper use

The tool is intended for hammer drilling into brick,
concrete and stone as well as drilling into wood,
metal, ceramics and plastic. The clockwise / counter
clockwise rotation facility also allows the tool to be
used as a driver. Any other use or modification to
the tool shall be considered as improper use and
could give rise to considerable dangers. The manu-
facturer will not accept liability for loss or damage
arising from improper use.

Features

Drill / hammer drill action switch
1
Ventilation slots
2
On / Off switch
3
Locking button
4
Speed preselector wheel
5
Rotation direction switch
6