Advertisement
3. Activating
Before you can send faxes, you will need to activate your Fax ATA.
Refer to specific instructions supplied by your provider or fax server
manager. Note: Connections to some service provider connections
and premise-based fax servers may not require activation.
To activate your Fax ATA, follow the steps below.
1.
Make sure you have your PIN for activation. This is supplied by your
provider or fax server administrator.
2.
You activate the Fax ATA from your Fax Machine or MFP.
3.
Go off-hook and dial the following:
*1*<PIN>#
(for example, dial *1*1234#)
4.
Press SEND or START if your Fax Machine requires this step to start
dialing.
5.
You will hear an audio confirmation once the activation is complete.
4. Send a Fax
You can now send a fax from your Fax Machine.
Getting Help: Go to
www.faxata.com
This guide describes the installation of AudioCodes' MP-202B HTTPSFAX Fax ATA
device. For other additional information on the MP-20x Telephone Adapter series,
including models MP-201B/1FXS, MP-202B/2FXS and MP-204B/4FXS which do not
support HTTPSFAX connections, refer to the downloads site listed below.
Information contained in this document is believed to be accurate and reliable at the
time of printing. However, due to ongoing product improvements and revisions,
AudioCodes cannot guarantee accuracy of printed material after the date published
nor can it accept responsibility for errors or omissions. Updates to this document can
be viewed by registered customers at: www.faxata.com.
© Copyright 2012 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice. Refer to the current Release
Notes that may be included with your documentation or hardware delivery.
Date Published: February 27-2012
www.audiocodes.com
for additional help and documentation.
Notice
Fax ATA
MP-202B HTTPS Fax Adapter
Quick Installation Guide
LTRT-041-HTTPSFAX
Advertisement
