Canon PowerShot SX60 HS Getting Started page 72

Hardware and Sound
" ~ ,1:.-.,r..-
arn:J pnnters
l
Add
1 cle'JICe
J
.
:
............
Saving Images to a Computer
Establish the connection.
On the access point, hold down the WPS
connection button for a few seconds.
On the camera,
press the [@] button to
go to the next step.
The camera connects to the access point
and lists devices connected to it on the
[Select a Device] screen.
Choose the target device.
Press the [ • ]['.,..] buttons to choose the
computer name, and then press the [@]
button.
Install a driver (first Windows
connection only).
When the screen at left is displayed on
the camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Double-click the connected camera icon .
Driver installation will begin.
After driver installation is complete, and
the camera and computer connection
is enabled , the AutoPiay screen will be
displayed . Nothing will be displayed on
the camera screen.
71