Page 1
Connecting to a printer and printing via Wi-Fi (PowerShot SX60 HS / PowerShot G7 X)
Page 2
You can connect your camera to a printer and print using Wi-Fi. When establishing a wireless connection with a printer, you can either use the camera as an access point (Camera Access Point Mode) or use another access point. IMPORTANT This camera requires a PrintBridge-compatible printer (supporting DPS over IP) for printing via •...
Page 3
NOTE When making Wi-Fi settings for the first time, a screen will appear for you to register a nickname for the camera. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi- Press the <FUNC./SET>...
Page 4
4. Press the < >< >buttons to choose [Add a Device], and then press the <FUNC./SET> ( ) button. NOTE Once a printer is added, the printer name will be displayed on the screen in step 4. To connect • to a printer again, simply choose the printer name from the list.
6. Once the printer is ready for the connection, the printers name will be displayed on the camera. Press the <FUNC./SET> ( ) button. The printer is added and the printing screen appears. • Printing Images 7. Press the < ><...
Page 6
9. The screen for setting the paper size appears. Press the < >< > buttons to choose the paper size, and then press the <FUNC./SET> ( button. ([9x13cm] has been selected in the example image above.) 10. The screen for setting the paper type appears. Press the <...
Page 7
11. The layout (border) settings screen appears. Press the < >< > buttons to choose a layout, and then press the <FUNC./SET> ( ) button. ([Bordered] has been selected in the example image above.) 12. The camera returns to the print setting screen Make sure that the settings are correct.