Sending still images and movies between two canon-brand
cameras (8 pages)
Summary of Contents for Canon PowerShot SX60 HS
Page 1
Sending still images and movies between two Canon-brand cameras (PowerShot SX60 HS / PowerShot G7X)
Page 2
NOTE • Only Canon-brand cameras equipped with a Wi-Fi function can be connectedto wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannotbe connected to if they do not have a Wi-Fi function. You cannot connect to PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this method.
Page 3
Press the <FUNC./SET> ( ) button, enter a nickname using the on-screen keyboard. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi. 3. Press the < >< >< >< > buttons to choose ( ), and then press the <FUNC./SET>...
Page 4
4. Press the < >< > buttons to choose [Add a Device], and then press the <FUNC./SET> ( ) button. NOTE • If you register a camera, that camera's name will appear on the screen in step 4. From the second time onward, select the camera's name to make the connection.
Page 5
6. Once both cameras are connected, a screen similar to the following one will be displayed. NOTE • Once you have connected to devices via Wi-Fi, recent destinations willbe listed first when you access the Wi-Fi menu by pressing the < >button.
Page 6
NOTE • You can choose the resolution (size) of images to send by pressing the < >< > buttons. • Movies cannot be resized. 8. A screen similar to the following one will be displayed. [Transfer completed] is displayed after the image is sent, and the image transfer screen shown in step 7 is displayed again.
Page 7
10. A screen similar to the following one will be displayed. Press the < >< >< >< > buttons to choose an image to send, and then press the <FUNC./SET> ( ) buttons.( ) will be displayed. To cancel selection, press the <FUNC./SET> ( ) button again.