Date-Based Image Storage - Canon PowerShot SX60 HS Getting Started

Date-Based Image Storage

Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
●
Choose [Create Folder], and then choose
[Daily].
●
Images will now be saved in folders
created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
( = 103, = 141), the zoom bar ( = 33), the MF indicator ( = 79),
and elsewhere from m/cm to ft/in as needed.
●
Choose [Units], and then choose [ft/in].
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
For greater calibration accuracy, display grid lines ( = 96) to help you
level the camera in advance.
1
Make sure the camera is level.
● Place the camera on a flat surface, such
as a table.
2
Calibrate the electronic level.
●
Choose [Electronic Level], and then press
the [ ] button.
●
Choose [Calibrate] and press the
[ ] button. A confirmation message is
displayed.
●
Choose [OK], and then press the [ ]
button.
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
●
Choose [Electronic Level], and then press
the [ ] button.
●
Choose [Reset], and then press the [ ]
button.
●
Choose [OK], and then press the [ ]
button.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
150