Shooting With The Fe Lock - Canon PowerShot SX60 HS Getting Started

Shooting with the FE Lock

Just as with the AE lock ( = 72), you can lock the exposure for the flash
shots.
1
Lift the flash and set the flash to [ ]
(= 86).
2
Lock the flash exposure.
●
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
[ ] button.
● The flash fires, and when
] is displayed, the flash output level is
[
retained.
●
To unlock FE, release the shutter button
and press the [ ] button again. In this
case, [ ] is no longer displayed.
3
Compose the shot and shoot.
●
After one shot, FE is unlocked and [
no longer displayed.
●
FE: Flash Exposure
Changing the Flash Timing
Still Images Movies
Change the timing of the flash and shutter release as follows.
1st-curtain
2nd-curtain
] is
Still Images
1
Access the setting screen.
●
Press the [ ] button, choose [Flash
Control] on the [ ] tab, and then press
the [ ] button ( = 30).
2
Configure the setting.
●
Choose [Shutter Sync.], and then choose
the desired option ( = 30).
The flash fires immediately after the shutter opens.
The flash fires immediately before the shutter closes.
Before Use
Basic Guide
Movies
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
88